alp-tone audio logo

alp-tone

audio

 ...giving you the signal

 

alp.Sn  series  audio  cables

 

alp.Sn series audio cables utilize a conductor that is inspired by the famed Western Electric KS-13385 audio transmission wire from the 1950s.

 

manufactured by Duelund Coherent Audio, this contemporary version is also a tin-plated, multi-strand copper wire.  it differs from the original in its use of OFC copper; the elimination of the inner pvc sleeve; and a cotton braid dielectric that is oil-impregnated and baked.  this conductor, therefore, has only natural materials along its signal path.

 

this tinned-copper conductor wire is highly regarded for for its authentic tonal qualities which collectively have been termed real-sound. it is described as rich; detailed with a natural live-like resolution; and having an intense tone color.

 

 

 

alp.Sn speaker cables

 

standard configurations :   2 x 16 awg   |   2 x 12 awg


standard termination options are bare-wire, 8mm spades or banana plugs.  spades and banana plugs are un-plated, pure copper milled from high-conductivity OFC.  terminal connection is mechanical which has lower resistance than a soldered connection.  soldered connections available upon request.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  2.5 meters plus increments of 0.5 meters

 

 

 

 

 

 

purchase >

 



alp.Sn rca interconnect cables

 

standard configurations :   2 x 20 awg


alp.Sn rca interconnect cables are available shielded or unshielded.  further details and discussion on shielding can be found on the  product notes page >

 

studio quality rca plugs with gold-plated, copper-alloy contact pins are standard.  terminal connections are soldered.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  1.0 meter plus increments of 0.5 meters

 

 

 

purchase >

 

 

 

alp.Sn xlr interconnect cables

 

standard configurations :   2 x 20 awg

 

design and construction follow the AES standard for balanced audio xlr wiring: twisted-pair conductor core with full shielding ground.  an unshielded version is also available with a separate wire ground.  further details and discussion on shielding can be found on the  product notes page >


studio quality xlr plugs with gold-plated, copper-alloy contact pins are standard.  terminal connections are soldered.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  1.0 meter plus increments of 0.5 meters

 

 

 

purchase >

 

 

alp.Sn loudspeaker jumpers

 

standard configurations :   1 x 16 awg   |   1 x 12 awg

 

termination options are 8mm spades or banana plugs:  un-plated, pure copper milled from high-conductivity OFC.  terminal connection is mechanical which has lower resistance than a soldered connection.  soldered connections available upon request.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  30cm / 11.8"   |   20cm / 7.9'' between termination

 

 

 

 

purchase >

 

 

 

 

 

copyright © alp-tone audio   •   all rights reserved