alp-tone audio logo

alp-tone

audio

 ...giving you the signal

 

alp.Cu  series  audio  cables

 

alp.Cu series cables utilize conductors made from ultra-pure, mono-crystal copper manufactured in the up-occ process with a PTFE dielectric.  this ultra high-conductivity copper is able to transmit electrical signals faster and with less distortion than ordinary OFC copper wires.

 

the alp.Cu conductor wire provides the detail and resolution benefits of silver yet still maintains the warmth and organic qualities of traditional copper conductors long in use throughout the audio industry.  as a consequence, this stranded-copper conductor rewards listeners with an exceptionally clear and detailed presentation which is neutral in tone and exceptionally rich in character.

 

 

 

alp.Cu speaker cables

 

standard configurations :   2 x 16 awg   |   2 x 12 awg


standard termination options are bare-wire, 8mm spades or banana plugs.  spades and banana plugs are un-plated, pure copper milled from high-conductivity OFC.  terminal connection is mechanical which has lower resistance than a soldered connection.  soldered connections available upon request.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  2.5 meters plus increments of 0.5 meters

 

 

 

 

 

 

purchase >

 

 

 

alp.Cu rca interconnect cables

 

standard configurations :   2 x 16 awg


alp.Cu rca interconnect cables are available shielded or unshielded.  further details and discussion on shielding can be found on the  product notes page >

 

studio quality rca plugs with gold-plated, copper-alloy contact pins are standard.  terminal connections are soldered.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  1.0 meter plus increments of 0.5 meters

 

 

 

purchase >

 

 

 

alp.Cu xlr interconnect cables

 

standard configurations :   2 x 16 awg

 

design and construction follow the AES standard for balanced audio xlr wiring: twisted-pair conductor core with full shielding ground.  an unshielded version is also available with a separate wire ground.  further details and discussion on shielding can be found on the  product notes page >


studio quality xlr plugs with gold-plated, copper-alloy contact pins are standard.  terminal connections are soldered.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  1.0 meter plus increments of 0.5 meters

 

 

 

purchase >

 

alp.Cu loudspeaker jumpers

 

standard configurations :   1 x 16 awg   |   1 x 12 awg

 

termination options are 8mm spades or banana plugs:  un-plated, pure copper milled from high-conductivity OFC.  terminal connection is mechanical which has lower resistance than a soldered connection.  soldered connections available upon request.

 

cable sheathing is an ultra high-quality, double-braided, multifilament nylon material which is flexible and resonance dampening.

 

lengths :  30cm / 11.8"   |   20cm / 7.9'' between termination

 

 

 

 

purchase >

 

 

 

 

 

copyright © alp-tone audio   •   all rights reserved